I just installed this light tonight inside my front door. I have the neutral wire connected. It turns on the 3 outside LED sconces as expected and the switch pairs to the bridge just fine. When I press the OFF toggle on the switch, the lights come down almost completely, however if I look at the LEDs, they are still on very faintly. I didn't see any t-shooting info on the website for this. Any help would be appreciated. Thanks!
Hello,
The issue you are experiencing is known as LED ghosting. The issue itself poses no safety concerns, however it can be annoying at times. There are 3 ways to remedy ghosting with a digital on/off switch. One is to change out the LEDs for a different make/model. Another way is to add an incandescent load to the lighting circuit. The last option is to add the Lutron minimum load capacitor (model# LUT-MLC) to the lighting circuit. This capacitor should resolve the ghosting issue you are experiencing. Typically only one capacitor is needer per circuit to remedy this issue.