Printable View
Had no issues with 1 of my in wall switches until today. Light doesn’t turn on (even using the buttons) and I see the led blinking green then quick red and back to green in a loop. Removed from Caséta app and can’t re-pair. Was looking for a document that explains what this blinking code means. Can anyone offer assistance ?
Thanks
Make sure you have the minimum load for your device. Typically ~50w or 1-2 LEDs.
You may need to reset it to factory defaults. This link is our very own SDR-Mike demonstrating the procedure.
https://www.dropbox.com/s/msuopf2ppe....MOV?dl=0Video
The Caseta Advanced Instructions (link below) have some blink codes listed. The installation instructions for your device may have blink codes unique to your device.
http://www.lutron.com/TechnicalDocum...structions.pdf
When the LED on the PD-5WS-DV switch flashes red, it's because the load is too small for the switch.There should have been a Minimum Load Capacitor (model LUT-MLC) included with the switch. This needs to be installed up at the load to help ensure the switch works properly.https://www.casetawireless.com/documents/lut-mlc.pdf