4' Billiards Light LED Retrofit

I've got a client that purchased a billiards light for above their pool table. There is a 4' fluorescent fixture installed in it that has to be replaced due to damage. I'd like to replace it with something thats dimmable via a RA2 dimmer like the 6CL for example and would prefer an LED solution at 4000K. Is anyone aware of a fixture that could possibly work for this project?

Thanks

Hi olympustechgroup,

When looking for smooth, continuous dimming with LED fixtures we recommend using the High Performance Fixture List . This is a list of manufacturers that have an option to use a Lutron driver in their fixture. Within the "Lutron Driver Family" field you may see an option for 2 wire and 3 wire dimming drivers. When dimming in Radio Ra2 use the following controls:

3-wire: RRD-F6AN-DV

2-wire: RRD-6NA
RRD-10ND

Quote:

---

Originally Posted by Phil L.

Hi olympustechgroup,

When looking for smooth, continuous dimming with LED fixtures we recommend using the High Performance Fixture List . This is a list of manufacturers that have an option to use a Lutron driver in their fixture. Within the "Lutron Driver Family" field you may see an option for 2 wire and 3 wire dimming drivers. When dimming in Radio Ra2 use the following controls:

3-wire: RRD-F6AN-DV

2-wire: RRD-6NA
RRD-10ND

---

Thanks Phil! The forum didn't notify me of your post so I apologize about the delayed response! This is exactly what I was looking for that I had not previously been aware of.