Printable View
I'm confused.
I have loads in HWQS sitting right next to each other in a wallbox. Three loads.
Load 1 is a 60 watt halogen eyeball can
Load 2 is three 60 watt halogen Recess cans
Load 3 is a 60 watt halogen hanging fixture
All devices are set to "Auto" in the equipment list
Load 1 is a HQRD6ND
Load 2 is a HQRD6D
Load 3 is a HQRD6D
Why is QHQS calling out a ND adaptive dimmer instead of a 6D?
Am I missing something here?
can you post a screenshot of the load schedule with type, wattage, quantity etc?
The ND isn't the adaptive dimmer it's just a 600W with neutral unless I'm confused. The adaptive is the 6NA.
My guess is that for whatever reason the software feels your wattage is too low for a non-neutral dimmer on this load. Doesn't make much sense if it is identical to load 3 through.
Here's the screenshot. I cant show the dimmer type because QS has these stupid rollovers instead of just showing the dimmer type as a line item. But the rollover on Dimmer 1 says "HQRD-6ND. HWQS Designer Maestro Style 600W Neutral Adaptive Dimmer". Dimmer 2 and 3 say standard 6D'sQuote:
Originally Posted by GMHunt
We would recommend sending your project file to hwsupport@lutron.com to see if the group can reproduce the issue and help determine the cause. As a current workaround, we would recommend going to the "Edit Toolbox" link and selecting the one zone dimmer you are using. You can then on the right hand side menu ensure the model number you would want to use for the zone. See attached image for details