Touchpro Thermostat with RTI System

Printable View

02-12-2015, 04:41 PM
javanderlinde

Touchpro Thermostat with RTI System

Hello,

I installed a RadioRa2 System with a Touchpro Thermostat and it works just fine. The client now wants to integrate the system with RTI. The problem is that on the latest software for RTI, (realeased september 2014) the Touchpro thermostat doesn't appear and the client can't control the air conditioner. Is there a driver for RTI to control this thermostat.?

Please advise,

Thanks in advance,

Jacob
02-13-2015, 05:43 AM
thomod

Jacob-
Are you using the "Lutron HomeworksQS" driver from RTI? This works with both QS and RA2 and the Touchpro is supported, I've used it on a couple of jobs.
Let me know if you need any help.
-Eric
02-13-2015, 07:37 AM
javanderlinde

Thanks Eric,
We are using this driver. The problem is the functionality of the thermostat. With the home control app I can turn the thermostat on/off, raise and lower the temperature, etc. With RTI we are recalling phantom buttons from the main repeater, and we can only program heat/cool set point on a scene. Am I missing something?
Please advise,

thanks,

Jacob
02-13-2015, 02:59 PM
thomod

1 Attachment(s)

Jacob-
Do you see the available commands as shown below?
Attachment 317

All times are GMT -4. The time now is 11:30 PM.

This website may contain user-submitted content and is for informational use only. Lutron disclaims any and all liability for the accuracy and correctness of content and conduct of any third parties in connection with or related to your use of the site. Please see the Terms of Use for more information.