Control4 Driver Keypad LED Logic

In my latest project I’ve got RA3 Sunnata Hybrid keypads in each of the bedrooms. Those bedrooms have Minka Smart (Bond) ceiling fans with lights. I’ve programmed a button on the Lutron keypad to control the Minka light and another to control the fan. Those buttons do not control other Lutron loads. I’d like to find a way control the LED logic on the keypads so that when the fan light is on the LED for the associated button is on (and off when off).

Is there a way to control the LED logic for Lutron (RA3) keypads through Control4? I know from the Lutron Itegration Protocol that the LED logic for keypads can be set by a distinct command. I just don’t see a way to access that control in the Control4 Lutron driver.

Any guidance would be appreciated.