Approved LEDs Flash On and Off Repeatedly
I have 6 approved retrofit LEDs (model #EVL6741AWH40) installed that are tied to a Caseta Switch (model #PD-6WCL-WH) and 2 Pico remotes. If I turn the lights on from a cold start, the lights work great. However, if I turn the lights off and then turn them back on shortly thereafter, they flash on and off in 1 - 1.5 second intervals and never stop (and these are hard flashes, not flickering, almost like someone is turning the switch on and off). In fact, I have to wait 5+ minutes before I can turn them on again to have them work. If I attempt to turn them on again in 1-4 minutes after the first cold start, I will get the repeated flashing.
Troubleshooting I've tried with no results:
+ Removing 1, 2, 3, 4, and 5 of the LEDs to see if one was causing an issue
+ Swapping out the Caseta Switch with another that I know works
+ Trimming the low and high dims
+ Testing across the wired and Pico remotes and the Lutron app. The results are always the same
I also have the exact same LEDs (4 of them) with the exact switch in another room and not having this issue whatsoever. This is so frustrating and I'm really hoping someone can help! Please!