Control Garage door with HomeControl+ app

Hi,
Could someone tell me the easiest way to control Garage door using HomeControl app? I tried using Visor VCRX but I cannot see it in HomeControl app.

Thanks!

Hello,

The only real way to control a Garage Door in the Lutron Home Control + app would be to set it to a keypad button that is programmed to trigger that contact closure on the VCRX. You then only see the keypad button but there would be no other option. Keep in mind a contact closure that controls a garage door does not truly provide a feedback that will tell you if the door is open or closed.

Quote:

---

Originally Posted by Scooter M.

Hello,

The only real way to control a Garage Door in the Lutron Home Control + app would be to set it to a keypad button that is programmed to trigger that contact closure on the VCRX. You then only see the keypad button but there would be no other option. Keep in mind a contact closure that controls a garage door does not truly provide a feedback that will tell you if the door is open or closed.

---

Just to add you can create a virtual keypad that never gets activated if you don't have room on a physical keypad button for this.