Lutron PD-OSENS-WH - Caseta Wireless Motion Sensor Occupancy/Vacancy

I have a Lutron PD-OSENS-WH - Caseta Wireless Motion Sensor Occupancy/Vacancy in my home office about 7 feet from where i sit at my desk. Nothing is obstructing view of the sensor, but if i am typing and not moving alot the light will go off. Is there is a setting to fix this or do I need to get a different product?

There is a sensitivity setting which is set to "low" by default. The link below has directions on how to adjust the settings.


www.casetawireless.com/sensorfeatures

Ok so what should I change it to?

Quote:

---

Originally Posted by Squill

Ok so what should I change it to?

---

Low Activity is the most sensitive setting for the PD-OSENS. Unfortunately, there isn't another programming option to increase the sensitivity of the sensor. One option is to increase the timeout period so that the sensor keeps the lights on longer giving it additional time to detect motion. The default setting is 15 minutes, you can try increasing this to 30 minutes.

If you are using a Caseta Smart Bridge, with the Lutron App, you can program the sensor for Active Hours for Occupancy/Vacancy thereby preventing the sensor from timing out during specific times of the day.