LEDs connected to PD-6ANS flash when OFF
LEDs connected to PD-6ANS flash when OFF
I have a pair of non-dimmable LED wall lights that I just connected to a PD-6ANS switch. The neutral is connected, and these outdoor lights are the only devices on this dedicated 15A GFCI circuit breaker. Each LED lamp is about 6 watts.
When the switch is turned OFF, the LEDs will flash about once every 4 seconds. As expected, they stop flashing when I pull out the tab on the switch, and begin again when the tab is pushed in.
I do not know the brand of LED, and I assume they are not on the official Lutron list, however I did not plan on using a dimmer so I assumed (incorrectly?) they should work.
Can I expect different performance from the PD-5WS switch? If so, do I need the MLC as well? Or is there something else I should be doing?
Justin in Dallas