Bug Report - PD-6ANS Dimmer Firmware - Adjusting high-end trim switches dimmer phase

I know it sounds crazy-- but I'm sure this is happening for me on multiple PD-6ANS dimmers and posting here may help some one googling the same issue.

Adjusting the high-end trim will often, maybe always, resets the dimmer phase to the top blinking option.

I am not sure this happened out of the box-- but it happens very repeatably for me in this state. I have https://www.amazon.com/Philips-45711...low+candelabra bulbs if it makes any difference. It's obvious when it happens for me because the bulbs buzz badly in one phase but not the other.

Oops... I just noticed I mentally switched the wrong switch/dimmer model in this thread title. Obviously, on the PD-5NE in the Caseta Line has dimmer phase. Not sure if an admin can fix the thread title?

Quote:

---

Originally Posted by CaliforniaGuy

I know it sounds crazy-- but I'm sure this is happening for me on multiple [EDIT: PD-5NE] dimmers and posting here may help some one googling the same issue.

Adjusting the high-end trim will often, maybe always, resets the dimmer phase to the top blinking option.

I am not sure this happened out of the box-- but it happens very repeatably for me in this state. I have https://www.amazon.com/Philips-45711...low+candelabra bulbs if it makes any difference. It's obvious when it happens for me because the bulbs buzz badly in one phase but not the other.

---

I registered for the sole purpose of saying thank you Californiaguy. You saved me hours of potential headache. I adjusted the low- and high-end trims today on my PD-5NE ELV dimmer and then my lights started flickering and/or buzzing once I saved the trim setting. As you noted, then phase had changed, so I just changed it back and it works great. This happened on 2 different ELV dimmers

Thanks again

Quote:

---

Originally Posted by yanks0114

I registered for the sole purpose of saying thank you Californiaguy. You saved me hours of potential headache. I adjusted the low- and high-end trims today on my PD-5NE ELV dimmer and then my lights started flickering and/or buzzing once I saved the trim setting. As you noted, then phase had changed, so I just changed it back and it works great. This happened on 2 different ELV dimmers

Thanks again

---

Glad it helped!