Convert 3 load switch into seetouch keypad

I have a 3 load switch in a bathroom. Is there anyway this can be converted to a seetouch keypad using a ra2 system? Please see picture.

Thanks!

Assuming this controls a bath fan with light and heat so if 1 of the loads is a dimmable light you could use a hybrid keypad for the light load. You will still need 2 load controllers for the other 2 loads. If one of the loads is a heater you’ll probably need an LMJ-16R-DV-B because it might overload an RRD-8ANS
The exhaust fan will most likely work fine on an RRD-8ANS but you’ll have to find a closet or somewhere to hide it, or an LMJ-16R-DV-B