Telnet user/password not working with 3rd party integration. Help please!

I am setting up a Crestron Home system in my place. I am trying to integrate Radio RA2 lighting but after adding the Main Repeater to Crestron Home software, I can't access it in Crestron Home as the user name and password I generated (Telnet in Ra2 software) are not accepted. Then I went to the Main Repeater IP address and entered the Telnet User/Password I generated in the RA software but it will not work - can't access my main repeater via IP.I can't recall setting up the main repeater with a username and password, but if I did I don't have it....Thanks so much!

In the RA2 software, go to Settings, Integration. I always add a separate login for AV integration.

Quote:

---

Originally Posted by randyc

In the RA2 software, go to Settings, Integration. I always add a separate login for AV integration.

---

That's what I did. All good. Thanks!

For future readers of this post, the most current versions of the RA2 software deleted the default logins for integration that third party controllers relied on for years. This happened at 12.6 I believe. If upgrading an older file, you are prompted about these default logins as to whether or not you would like to retain them. If you are not changing anything in the third party, then do NOT delete them, as this will result in a service call to your third party provider. If it is a new RA2 install, set a new user and password specifically for the third party and supply to your provider/integrator.