Switching to LED lights with Grafik Eye 3106s
I have about 6 Grafik Eye GRX-3106 dimming system all over my home which worked well for me for years with my halogen lights. Now, I shifted to LEDs and chose Philips dimmable 7W MR16 bulbs (92900002373). I tried using either magnetic or Philip's electronic transformer with the bulb, and in both cases, when i turn on the 3106 for the first time by pressing a scene, it jumps to a dimmed light as opposed to before where it starts gradually and softly from zero light. If I have each zone of a room in different dimming levels, you can actually see lights popping up differently with each zone. Its not an elegant look and not what I'm used to with my halogen bulbs. Switching off is not a problem or switching from scene to scene. Its only the start-up scene that is quite annoying. Is there a way to fix this? Perhaps my 10 year old 3106 is not compatible with this particular Philips LED bulb. Perhaps, my 2-wiring setup is not right. Do I need an interface module or need to upgrade or change bulb? There are not too many dimmable led MR16 bulbs available in the country where i live (Philippines) and Philips is already considered the more expensive brand even recommended by lighting companies which worked with Lutron for years. I'm scared to even use any China-made LED bulbs. One lighting company I asked said this is what to be expected with LED lights. They can only be dimmed upto 5%. Do I just have to accept the fact that I can never be able to dim my LED lights below 5% and therefore, have to get used to lights turning on abruptly?