Just create a Plug-in for RA2 that integrate with Homeseer.
Just create a Plug-in for RA2 that integrate with Homeseer.
By one click it create all your device, after you can control, create events to control RA2, security, zwave, send email, and more.
-Config page for IP, Port and creation of the device
-Creation device by one click
-Control light and appliance
-Simulate the PICO_KEYPAD
-Control SeeTouch_Keypad
-Grafik Eye
-Shade up and down
-Venitian blinds Up/Dpwn/Tilt
-Control Output
-Status of the Led of the SEETOUCH_KEYPAD
-Control Scene of LutronRa2
-Occupancy now working (will stay in motion until your program timer of the device finish)
-Remote 4 GROUP_REMOTE
-RRD-2ANF fan control
-Timeclock ( Away, Normal, Etc you create)
-Run the timeclock event you create in RadioRa2
-Control Thermostat
-Config page with Option to not change graphics or name of the device to the default of RadioRA2
Very specific question...
With Homeseer and the plugin to both Caseta and RR2, could I program everything so that I can push a button on the SEETOUCH_KEYPAD and it operate both RR2 and Caseta at the same time? Or, can I push a button the SEETOUCH_KEYPAD and it control Caseta devices?
Yes but you need both plugin, to control caseta only with the seetouch just give the button a name without assign a device than in HS make an events when the seetouch button is press do what you want with the Caseta, to control both 2 choices, let seetouch control the RA2 device and in homeseer make the events to control Caseta or make homeseer to control both. You can do the same thing with a pico or any device of Caseta and RA2.Quote:
Originally Posted by sizelove
This will work, but you will probably notice a slightly delayed response from the Caseta devices. This may be even more noticeable because the Radio RA2 devices will appear to respond instantly (via Clear Connect RF rather than HomeKit).Quote:
Originally Posted by sizelove
I have been using a 4-Button Pico (and a Caseta plug in dimmer) to control 3rd party HomeKit devices...the Caseta devices respond instantly via RF, while the 3rd party devices have a slight delay when responding to the HomeKit "trigger".
I don't know about the HomeKit but with homeseer it it's hard to see the deference. See this post from a user: http://forums.homeseer.com/showthread.php?t=186984