2 Caseta's on 1 Pico?

Can I operate 2 caseta wireless outlets on 1 pico switch?
I have 1 caseta operating 2 lamps in the back of the room but have 1 lamp in the front of the room I'm trying to work with the Pico WITHOUT running a long extension cord across the room.
Thanks

Yes. You just program the same pico to both wireless lamp modules. Both lamps will turn on/off/dim and have the same favorites setting. You can still independently control them with the buttons on the module itself.

I have done the similar with two in wall dimmers, wired to sconces above the night stands in our bedroom. One pico mounted on the wall when you walk in, turns both sconces on, then we have independant control over each pico at the switch on either side of the bed.

Chris.

Quote:

---

Originally Posted by Cincycaddy

Yes. You just program the same pico to both wireless lamp modules. Both lamps will turn on/off/dim and have the same favorites setting. You can still independently control them with the buttons on the module itself.

I have done the similar with two in wall dimmers, wired to sconces above the night stands in our bedroom. One pico mounted on the wall when you walk in, turns both sconces on, then we have independant control over each pico at the switch on either side of the bed.

Chris.

---

Thanks Chris. Is pairing the two Casetas to the one Pico complicated?

Nope. Program pico to dimmer one per instructions. Program same pico to dimmer two per instructions.

Good luck.

Chris.