1 Attachment(s)
Four lamps, one living room
Hi. I'm a total newbie to the idea of WiFi controlled lighting.
We living in a 1920's period American Foursquare. I want to light the living room by hanging four dimmable LED pendant Edison light bulbs in a large square about 2/3rds the size of the entire ceiling. I have attached a PNG image.
#1 in the PNG. I assume the most cost-effective and wattage-compliant way to do this is to put in two smart outlets, one on each side of the LR and run two rope cords out of each and over to two of the four bulbs. If so, will one SmartBridge control all four lights (via two smart outlets) simultaneously so that one dimming operation dims all four lights via the two outlets? If so, is it correct to assume that the maximum wattage of each LED Edison bulb will be 50 watts?
#2 in the PNG. Alternately, could I use a single smart outlet, using both of the plugs, and wire them as shown to control the four lights in a single dimming operation? If so, is it correct to assume that, this way, the maximum wattage per LED Edison bulb will be 25 watts?
Thank your for your kind help.
Glenn
https://forums.lutron.com/attachment...ntid=596&stc=1
Four lamps, one living room
Thank you, Sawdust. I hope to be using the plug in lamp module (or modules) to run rope light cords up the the ceiling. Does this help. Glenn
Quote:
Originally Posted by
Sawdust
To be clear are you planning on using a hardwired switch or the plug in lamp module? Either way most leds only range from 6-13w. So that will not be an issue.