Delay with PD-10NXD 3-way with a Mechanical Switch

Hello!I have just finished replacing about 15 switches in my house with Caseta dimmers, and they are working like a champ. I just added a 3 way using a PD-10NXD and a mechanical switch, however I am seeing a 1-2 second delay when the lights are turned off from the mechanical switch. When turning the lights on from the mechanical switch the delay is much less. I was hoping someone had some tips! Everything from the caseta dimmer works as expected.Thanks,Mike.

Quote:

---

Originally Posted by mhill

Hello!I have just finished replacing about 15 switches in my house with Caseta dimmers, and they are working like a champ. I just added a 3 way using a PD-10NXD and a mechanical switch, however I am seeing a 1-2 second delay when the lights are turned off from the mechanical switch. When turning the lights on from the mechanical switch the delay is much less. I was hoping someone had some tips! Everything from the caseta dimmer works as expected.Thanks,Mike.

---

The 10NXD is looking for a change in state on the blue wire/terminal. It sounds like when you flip the 3-way you are removing power from the 10NXD. When power is restored it takes a few seconds to power back up. Long way of saying check the wiring.

Thanks @randyc! The delay I am seeing is on turning the light of vs turning it on. It turns on with a small delay but no where near as much as turning it off.