We have 2 HWQS jobs installed right now. Both of them are exhibiting "ghost in the machine" behavior.
I walked away from one 2 weeks ago. it was working perfectly.
Received a call from an unhappy homeowner, saying the buttons don't do what they say they are supposed to do.
I arrived on site today.
Sure enough, something has changed.
My "all off" global scene is not turning off two switchlegs anymore.
My "stairs" button is only turning on and off two of the three associated switchlegs.
I uploaded programming again, (the same, unaltered file) and now everything is working as it should,
Except, I have a scene (not shared) across 4 keypads. the LED logic works correctly on all but one keypad.
Meaning, if I press the "kitchen" button that turns on 3 kitchen lights, on any of the 4 keypads, the kitchen lights all come on. On 3 out of the 4 keypads, the LED reflects if the kitchen is on or not, the 4th keypadLED lights when you press it, but then goes out.
LED logic is set to "Room" on all keypads, and the same exact loads turn on and off as a toggle.
Not sure what is going on here, but this is the second HWQS project where mystery loads seem to stop working, or the lights that turn on and off do not match up with the programming. I as well as my customers are getting more and more frustrated.