Appliance Module for outdoor purposes?

Hi folks,

There are two pumps driving an outdoor water feature. Is there the equivalent of the RadioRa2 Appliance Module (http://www.lutron.com/en-US/HeroImag...-3_01_hero.png) rated for outdoor use? If not are there any outdoor receptacles? Would be great to drive this ON/OFF as part of the RadioRa2 Home Control dashboard.

Thanks!

RadioRA2 does not have any outdoor rated products. Depending on the pumps, you could use an RRD-8ANS-WH in line with the pumps or the receptacle the pumps are plugged into. Just use a plastic W/P box for the switch.

I have an install going on right now which is bringing a transformer inside to use an 8ANS, and we're also putting in 15A switched outlets outside through the softswitch (warning: only works in Inclusive). Neither of these might work easily for you, but if you have a home run to the house with the power, you could drop the softswitch inline.

Thanks everyone. Perhaps I can use an appliance module in a waterproof box too. Would allow for more flexibility in the design...

It probably would work in a waterproof, but recognize the temperature specs for the device to avoid premature failure.