There are several 0-10V dimmable LED lights in an office that I would like to setup with Lutron dimmer switches, but I need it to work with RA2 Select. Can someone point me to the correct dimmer switches for this scenario?
Printable View
There are several 0-10V dimmable LED lights in an office that I would like to setup with Lutron dimmer switches, but I need it to work with RA2 Select. Can someone point me to the correct dimmer switches for this scenario?
I believe that the recent update added the powpaks for select. There is a 0-10v dimmer that will work. Other wise if you needed to use an in wall solution a compatible interface device would be required. The Pow Pak is the best option however.Quote:
Originally Posted by bnations
http://www.lutron.com/en-US/Pages/Su...er=LMJ-5T-DV-B
This is for an office building application, so in-wall switches in each of the offices and common areas are needed. Are there no in-wall switches that fill this need?
Not on system. But you could use a pico on the wall and if you have a suspended ceiling put the pow pak up there.Quote:
Originally Posted by bnations