meeting room automation with QS GrafikEye

Except dim down lighting, close shade, pull down projector screen with I/O interface for " presentation" scene, can i integrate to switch ON projector together too? If so, what is the interface device?

With only QS GrafikEye and NWK, can GrafikEye send customize protocol to AV system when press scene button?

Unfortunately, the Grafik Eye QS and NWK can only receive custom strings, not send. The only integration that can be done is CCO outputs. However, if the third party AV system can see the feedback (i.e. ~DEVICE...) of the QSG and NWK on the network and act on that feedback, then it could be done that way.

Quote:

---

Originally Posted by Armando B.

Unfortunately, the Grafik Eye QS and NWK can only receive custom strings, not send. The only integration that can be done is CCO outputs. However, if the third party AV system can see the feedback (i.e. ~DEVICE...) of the QSG and NWK on the network and act on that feedback, then it could be done that way.

---

thanks for your info.

Is possible AV system can read Pico signal? Let's say make use of Pico to send signal--> QSM --> AV system processor.

Any idea to switch ON projector using QSG with integration?

Unfortunately, the AV system would not be able to directly read the PICO signal. If the projector can accept a contact closure, then you could use the QSE-IO to send a contact closure output when a button is pressed to power the projector on or off.