-
3 Attachment(s)
Not giving up on this one.
Would love for someone to try the same thing and give me feed back or am I alone on this one?
Created a new file in 10.4. Everything in the equipment room. Main repeater, Connect bridge, standard keypad, WPM, 6CL. in that order.
Don't seam to be able to upload the file here.
Again, not connect to any systems. Only thing I'm connected to is WIFI.
Input 3 serial numbers from other jobs. WPM 01E30F19, Keypad 018FAC46, 6CL 018CB4A4
Obviously did not try to activate.
Go to Design and click on WPM, Done, and back to activation. WPM serial is still there.
Go back to design click on either the keypad or dimmer, Done. Stay in design and click on WPM, Done. Go to activation and WPM serial # is gonehttps://forums.lutron.com/attachment...ntid=538&stc=1https://forums.lutron.com/attachment...ntid=539&stc=1https://forums.lutron.com/attachment...ntid=540&stc=1
-
Did the exact same thing in 9.3 with no problems
In 10.0 all I had to do was click on the WPM in design and S# was gone. With or without the connect bridge
-
Hi MitchE
If I had a Ra2 file with WPM activated in it, I'd try it. I'm going to assume based on your thorough testing that you've found a bug in the Ra2 software. Hope it's resolved soon.
-
That's the kicker digi1. I created a new file, non activated, never saw a repeater and this happens.
Anyone with software can try this to confirm.