Multiple Light Dimming with PowPak RMJS-8T-DV-B?

In order to dim 3 LED lights with a single PowPak RMJS-8T-DV-B, I just wire all three lights together the same as if I was wiring a single light, yes?

The lights I am using are: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

I am using a PJN-3BRL-GWH-L01 Pico control.

Thanks,

John in Montana

There are 2 controls involved (in the same device).

Line voltage - wire the same as if you were connecting to a mechanical switch. This will provide on/off control. 8 amps max.

Low voltage - you need a LV wire from the control to each fixture. These can be daisy chained but is polarity sensitive. This provides dim control only. 60ma max.

Quote:

---

Originally Posted by randyc

There are 2 controls involved (in the same device).

Line voltage - wire the same as if you were connecting to a mechanical switch. This will provide on/off control. 8 amps max.

Low voltage - you need a LV wire from the control to each fixture. These can be daisy chained but is polarity sensitive. This provides dim control only. 60ma max.

---

Thanks Randy, that is what I thought on the daisy chain, just wanted to confirm. Appreciate the help!

John