Connect App - Unsuccessful Notice - Error Message

Welcome thoughts on an error message on the Lutron Connect App. Trying to link to a Lutron Connect Bridge. App asks us to log in to the Lutron Account, add the Home by clicking the "Add" button the Connect Bridge. App finds the Bridge, but then puts out an error message "Connection to the My Home Main Repeater/Processor was unsuccessful."In the Inclusive program, I am having trouble getting the system to "Find" the connect bridge. When we installed it, the only way we could get the system to find it was to hard wire connect to the system (not wifi), but once we used an ethernet cable, it found and added the Connect Bridge to the system. The program has successfully transferred to the Repeater. We can upload new switches and programs to the Repeater as well. We just can no longer connect to the Bridge.Any thoughts?

We are now getting an error message of "Connection to My Home was unsuccessful." This was after signing out of the App and signing back in and reconnecting with the Add button. Still unsuccessful connection....

We would advise contacting us at systemsupport@lutron.com or reaching out to our phone agents at 1-888-Lutron1 (588-7661). This issue will be better handled in contact with our agents where we can send instructions and view the results. Thank you!

I started getting the exact same error once I did an upgrade to 12.10. Tried rolling back to 12.9 without any success, then under the advice of support went back to 12.10 after they reviewed the logs. Im still getting Main repeater lockouts that appear to be coming from both my gateway IP as well as the Connect Bridge. When the bridge is removed from the network I dont see any Main Repeater lockouts happening (after having this removed for the entire weekend, there are absolutely ZERO telnet activity on my network, as validated with Wire Shark). Soon as the Connect Bridge is re-added to the network AND I try to connect with the iPhone app, WHAM... I get locked-out (well the alternating red LED flash pattern starts).Scanning both the bridge and the repeater shows some interesting open ports (I didnt know that the bridge had any HTTP interface - its basic info, but their nonetheless), not that ssh was open on the bridge. That didnt lead to much, however Ive tried to "factory reset" the bridge several times without any luck. Im going to try getting another bridge form my distributor this week adn see if that makes any difference. Im suspecting that the login credentials have somehow changed to cause the logouts (I dont see anything in the designer other than "preconfigured" for telnet logins.... whats the probability that that is broken? Anyone know how to check what that login / password actually is or change it?