3-Way setup with Caseta at one end, motion sensor at the other?
I've got a setup that doesn't match anything I've seen in the Forum; I would really appreciate some advice.
My entry hallway turns a corner. The lighting for the hall runs on a 3-way switch. The switch by the exterior door uses a motion sensor: it turns on when the exterior door opens or when someone turns the corner into that end of the hall. Works great, does exactly what I need.
The interior end of the hallway opens into a great room. That interior part of the hall includes stairs, so proper lighting is a safety issue--but a motion sensor there doesn't make sense because it would be triggered constantly.
Currently, there's a simple, 2-way switch (no motion sensor) at the interior end. That setup works OK: I can turn the light on manually via the switch on my way out, and the motion sensor turns it off again after a few minutes. But I'd like to replace the existing 2-way switch with Caseta, so I can turn the light on/off via the app.
If it matters, both the existing motion sensor and 2-way switches appear to be Lutron.
Can I keep the motion-sensor switch on the exterior end and add a PD-6WCL (or another Caseta switch option) on the interior end? If so, do I have to do anything special with the wiring?
Many thanks for any advice.
