Control Two Different Caseta Dimmer Switches With One Pico Remote?

So i just bought the lutron caseta smart bridge and a lutron caseta dimmer light switch in wall.And i know that one pico can control multiple dimmers or anything it can control at the same time.But is there a way to control 2 different dimmers at different times without both of them doing it at the same time?Cause i would like to pair the porch lights to one pico and the living room to one pico but want to control the porch separately and the living room separately with one pico remote.Is this possible in any way?

Page six of this document- http://www.lutron.com/TechnicalDocum...ary/369847.pdf

4 button Pico, upper left- PJ2-4B-Gxx-L21 should do the trick, just no dimming.

Quote:

---

Originally Posted by SanDiegoRep

Page six of this document- http://www.lutron.com/TechnicalDocum...ary/369847.pdf

4 button Pico, upper left- PJ2-4B-Gxx-L21 should do the trick, just no dimming.

---

The other option would be to use the -L31 version. This is a 3-scene unit that you can use to set the lights to different levels as part of a scene. You can have a scene where one light is on and the other off, and a second scene the other way around. It's not true individual control though. If you want individual control with dimming, you would need individual Pico remotes, or use the smart phone app.

On the 4 button remotes, can you order custom engraved buttons afterwards to replace the standard buttons, or do you have to order the remote with the custom engraved buttons from the beginning ?

You need to order the engraving first. You cannot replace the "faceplate" of a Pico.

Ah thanks SDR. About how long does it take to order a custom engraved remote ?

I believe 2-3 weeks. You'll need to download the form to send with the PO.

Got it thanks!