Troubleshoot Replacing old 3-way dimmer new Lutron LED dimmer
I would like to replace an old 3-way dimmer with a new Lutron LED dimmer, DVCL-153PR. I followed installation instructions for the new dimmer provided by Lutron. I can turn the LED lights on, off and dim. However, I cannot get the the other location rocker switch to work. The old dimmer switch has 3 wires - black (hot), yellow and red. The house electrical box has 5 wires - 2 black, red, ground and white. The old wire hook-up was - black (hot) to black, yellow to red, red to black.
The wire connection with the new DVCL-153PR to the electrical box is - black to black (hot), red to black, red/white to red. This hookup worked to turn the LED lights on/off and dim. However, the other switch did not work.
To minimize the inconvenience of only the dimmer working, I switched back to the old dimmer so that both switches work again.
Switching the red and red/white wire from the Lutron Diva switch did not help.
I'd like to use the new dimmer so would appreciate a few suggestions.
Thanks