Also having issue with mechanical 3 way seitch
Hello all,
I’m trying to instal a PD-5ANS for my upstairs light. There’s 1 single switch next to 1 bedroom and 1 dual gang box with 2 switches next to the other bedroom. The box with the 2 switches has a dual pole for the down stairs light with a second switch at the bottom of the stairs. The other switch is the second/primary switch for the upstairs light. I want to put the PICO remote at the bottom of the stairs.
I want to put the 5ANS in the single switch location. I have wired it as follows:
Black-common
White-neutral/white
Green-ground
Red-other black
Blue-red
On the other switch (the dual gang box) I’ve wired in is as follows
Red-as is to traveler pole
2 blacks (including “common” wire) together with supplied yellow jumper which was attached to the common screw.
The light does not turn on with either switch. The LED indicator is on and brightens when on position on 5ADS is chosen and dims when off.
Any suggestions?
Thank you very much.