Triathlon / RR2 Low End Limit
I just added a Triathlon Roller to my RR2 system and I've set up and installed Lutron shades for other jobs and in your class here locally. However, the included instructions did not work for attempting to set the low end trim.
Instruction set says press shade button and the LED will illuminate and stay on, but mine does not stay on. I proceeded with the instructions to hold open and raise button on my pico and that didn't do anything either, please advise. It seems like I cannot get the shade into programming mode.
Is there a way in the RR2 software to adjust the low end trim, like you can on the dimmers? I didn't notice any.
Last, I was hoping to use the day light sensor, but see there is still no provision for it in the RR2 software.
Observation: You use to have the Pico for shades only listed in the shade section of the RR2 software. It's still there (& additionally with keypads) but defaults to "Light" instead of a "Shade" Pico when selected out of the shade section product group. It took me a minute to adjust the engraving to finally get it to program to shades. I know this was a point of confusion before, but I don't think you made it any better. If selected from the shades group it should at least default to a shade operation and engraving.
RR2 9.2
Inclusive
Main Repeater current version