I have a need to install 18 individual Lutron RM5T-DV-B to control 0-10v fixtures. I cannot install new wire. Is there a better solution? I was hoping to find a reliable RF or line carrier control for this project. I believe these can be controlled with a PICO remote. Can anyone tell me how many RM5T-DV-Bs can be paired to one PICO remote?
I believe the correct model is RMJ-5T-DV-B. The "J" indicates it is compatible with US RF frequencies.
Lutron.com is offline so I can't confirm but I believe you are limited to 10 devices so 1 Pico with 9 modules. You can check if RA2 Select supports the module (it would be LMJ-5T-DV-B). RadioRA 2 definitely has supports the LMJ modules and you can assign as many as you want to the Pico.
I know you said you can't run wires but the RMJ/LMJ may support more than 1 fixture (depends on the specs of the fixture).
Hello Suncoast,
Thank you for your post!
Pico Controls (or other One-Way devices) can transmit to any number of devices with-in the 30ft RF Range. As long as your 18 PowPaks are within 30ft, the Pico should be able to pair to all 18.
Hope this helps!
Julia K.