How is "Room LED Logic" affected by unaffected loads, delays, and sequences?
Would anyone have a chart or description of how a button's Room LED logic is affected in all cases?
Does someone has a 4 column chart populated like this?
-----------
Button Press Action - Assignable Item - Delay - LED Status
(PRESS ON or OFF) - (Lighting/Fan Zone, Manual Sequence, Automatic Sequence) - (YES or NO) - (ON IMMEDIATELY, ON AFTER DELAY, OFF AFTER DELAY, OFF IMMEDIATELY)
-----------
Also, if a Sequence Step has an assignable item with a delay, how does it affect the LED Status? (Not sure if that question makes sense or is clear)
Through experience, I am suspecting that the LED logic seems to behave different from my own expectations...
Part of the reason I ask is because i'm trying to accomplish two things:
1) a button that toggles a lighting zone on and off, and monitors that zone through "toggle Room LED logic". However, I want only the Press ON action to trigger a fan on with a delay
2) a toggle button with LED logic that monitors ALL lighting zones (zones 1-4) in a room, but only turns on one zone (zone '2') in the room. If any zone in that room is on, the LED should be ON, and the next button press should turn zones 1-4 off, and then the LED should be OFF.