Control HomeWorks system via Netstreams DigiLinx, need help please!
I have lutron 8 series p5 processor and 8 rpm-4r modules with ControlLinx on netstreams part.
Digilinx system is already configured and working fine.
According to integration manual http://www.clearone.com/uploads/reso...h_DigiLinX.pdf the setup is very easy - basically, you just connect ControlLinx to lutron processor with provided cable, add serial address to buttons in digilinx dealer setup and thats it.
Unfortunately, it does not work! I can turn lights on and off using system control feature of terminal in homeworks illumination software, but there is no reaction if I use digilinx control.I never configured lutron systems before, maybe there are some settings that I missed?
Homeworks illumination project attached. http://s000.tinyupload.com/index.php...04036761814444
Steps I took to configure:
create new project, add new loads on load schedule screen, add enclosure, processor and rpms in panel assignment screen, assign all loads to available links in assignment screen (copy serial addresses from here to digilinx), upload config to processor.
http://i.imgur.com/DnfNUDv.png