Help configuring system with smart hub, 2 wall dimmers, 2 Picos.
New installation. Got the 5 pack- 2 dimmers, 2 Picos, Smart bridge.
On my new porch, I have 4 lights - 2 are controlled by one circuit/switch and 2 by another. My electrician installed a Caseta dimmer switch on each of those circuits so each of those switches controls it's two lights. He then programmed both Picos to control both sets of lights together, that is, each Pico will turn all 4 lights on and off (no smart bridge installed yet).
First question: how specifically did he do that; program both Picos to activate/deactivate both switches. (Please give specific steps). I want to be able to get it back like this in case my smart bridge plan doesn't work.
The way it works now is how I want it to work, with both Picos controlling all four lights. I now want to add the Smart Bridge to allow control from my phone and all the bells and whistles. But I want the switches and Picos to function as they do now.
Second question: so, how do I do that? I set the Smart Bridge up, all is good there. When I go to add a switch, I get the warning it will be unpaired from the Pico and I didn't want to go past this step without all the further information. Please give me specific instructions on which devices to add in what order and how to get them linked so I get the same functionality I had (both Picos controlling both switches). I'd appreciate specific steps.
Thanks,
Russ