Printable View
One set of lights in our RadioRA2 system comes back on immediately when turned off either from one of the dimmers (4-way installation in stairwell) or from the Lutron App. This only happens sporadically - sometimes turning it off again helps, sometimes 5-10 tries and/or only from different dimmer. Numerous lights in the overall system, but only the stairwell lights have this problem. Any suggestions would be appreciated. Thanks.
More details please. Type of lights? How many? Do they come back on at full bright or dim? Type of dimmer?
Make sure the plates are not pinching the buttons. Verify that the tap-switch on the dimmer/companions operate freely. Same for keypads.
Are there any motion sensors in the system?
Disconnect any 3rd party integration. Unplug the Ethernet (for testing).
I did see a client put a box on a tabletop keypad. The weight of the box was just enough so it would randomly push buttons on the keypad.
Quote:
Originally Posted by jdb1073
I'm experiencing the same symptoms. Our system has been in place for 10 years. The only thing that has changed are the bulbs. I've examined the switches and plates. Even after 5-10 attempts one light in the grouping is very dimly lit. Pinching doesn't seem possible. Any ideas?