Anyone out there integrating 3rd party DMX into QS? I've had some recent successes prototyping an rs232-based product from response-box.com. Its programmable to load and save color scenes on a room-by-room or load-by-load basis, and provides a simple way to customize RGB values on the fly using a properly programmed Lutron keypad. Right now I've got RGB customization working using a 10-key RF table top unit (load, store, next Stored scene, previous stored scene, add/subtract RGB increments to change the displayed color). It's nice because one DMX box can do up to 63 stored scenes, with each scene capable of addressing the entire universe.
Adding rooms is a bit of a problem, because each new RGB load will require a unique slightly-tweaked instruction set to properly index the DMX channels corresponding to that load ( this procedure takes the place of being able to assign the load to DMX channels once during device configuration, like you can with the LUTDMX). The other drawback is that fading and cross fade settings are imbedded in each individual instruction, so changing them wholesale takes a fair amount of time.
Any other implementation options I should look at before deploying?