Can a remote switch (RD-RS) be used with a dimmer to toggle the load on/off?
I have a scenario where I have a fully automated light - it's only turned on/off via a motion sensor, and the load is tied to an 8ANS. It has a RD-RS on the other side of the room (about 5 feet away).
I want to replace the 8ANS with a hybrid keypad so I can get a keypad in that location to add some scene functionality. I have no intentions of dimming the load, and the switches are never physically pressed to turn these lights on - it's in a back inside entryway area where the light comes on when the doors open or when motion is detected.
Do I have to replace the RD-RS with an RD-RD, or will the RD-RS still work to control the ON/OFF, but limit the functionality that I have in terms of dimming from the remote switch location? If it works, and I'm only limited in being able to dim the lights from the remote location, I'd be 100% fine with keeping the RD-RS installed...