Pentair Intellibrite Pool Light & Lutron Homeworks QS

Hi,

Has anyone done pool light control with Pentair Intellibrite Pool Light.

How can Lutron Homeworks QS control them?

Thank you.

HomeWorks QS can integrate with third party controllers using Ethernet or RS232. Please see scenarios 2 and 4 of the attached app note on how to control third party devices with Ethernet or RS232. After adding and configuring the third party controller in your equipment tab, you would need to edit the command sets to type in the third party commands the pentair controller would accept. Then you can use button presses to send these integration commands.

Quote:

---

Originally Posted by Armando B.

HomeWorks QS can integrate with third party controllers using Ethernet or RS232. Please see scenarios 2 and 4 of the attached app note on how to control third party devices with Ethernet or RS232. After adding and configuring the third party controller in your equipment tab, you would need to edit the command sets to type in the third party commands the pentair controller would accept. Then you can use button presses to send these integration commands.

---

I believe he may be asking about connecting the lights directly to a switch or relay module. The way colors are selected is by cycling off and on the power rapidly a given number of times.

You could do it either way RS232 through an iLink to Pentair controller or directly control the lights and rapid toggle the lights as mentioned. Pentair and iLink suck so I would control directly.