Printable View
Does anyone have any tips on controlling the scenes via the rear IR interface. I've tried some old HEX codes with no luck am I missing something? I have I am trying to fire the codes from a Control4 system if this helps. Is there an official set of IR codes?
Domino,Quote:
Originally Posted by domino
Attached are the IR codes for the Grafik Eye controls.
hai, im new hereQuote:
Originally Posted by Kevin P.
im trying use elan to control GRX
and i use your code IR kevin P.
and thanks for that couse usefull for me
Quote:
Originally Posted by rahmadmulyono
hi all..........i have QSGR-4P graphic eye , i also want to fire ir code by control4. please suggest me codes and how to fire by control4. i am new here
The IR codes posted in this thread are the correct IR codes for the Grafik Eye QS. One thing to check is to make sure the IR is enabled on the unit. To check this, put the Grafik Eye into programming mode by pressing and holding the scene 1 and off scene buttons together at the same time for 5 seconds until the LED's next to the buttons begin to scroll. You are now in programming. Scroll down to IR setup and hit OK. Scroll to integral IR and hit OK. Make sure it is set to enabled. Other than that, make sure Pin 2 is common and pin 1 is IR input. Hope this helps
Thanks for sharing this with me.......Quote:
Originally Posted by Kevin P.