-
ELV Dimmer
After several months of successful use, my ELV dimmer is not working consistently. The units LEDs (top and middle) start to flash.
I can pull out the reset tab and get it to work for a few minutes.
Not sure how this device wires (neutral or mlc). Load is a strip of LEDs. Trying to get more info. Have to use a ladder to check the load and will pull the dimmer to check wiring.
Thing is, it worked great.
Thoughts?
-
The top and middle LEDs indicate it is in ELV mode but detected a MLV load. See advanced instructions for how to set the mode (link below). It's not uncommon for it to work for a while then start having issues.
Also make sure the neutral is connected.
http://www.lutron.com/TechnicalDocum...structions.pdf