Attached is a retrofit installation we finished today. Before that, the client had three switches which as you can see were replaced with PD-6WCLs. Then we added a fourth position to the gang for a Pico remote control. The Pico was assigned to control all lights. The upper buttons therefore turns everything on, and the lower button turns everything off. The middle button sets lights to 50% and the Raise/Lower buttons, well, that we all know what they do.
Question 1: can the middle button be programmed to 30% instead of 50%?
Question 2: Can we program the Pico to turn everything on but at a pre-defined level (let's say 75%)? I only managed to do that using Scenes on the Lutron app, but client is not always with her phone and app opened when she arrives home.
Thank you in advance.
Attachment 429