HWQS dimmer 'reassignment' bug, RA2 vs QS wallbox device modification
Ra2 is much simpler to change wallbox devices compared to QS. When at the edit field of Ra2, I can reselect a dimmer as a hybrid keypad or switch and not have to change programming or link assignment of the associated loads and devices. In QS changing a load from dimmed to switched is a bunch of steps, from what I've learned so far I need to drop in a new switch with no load, unassign the load from the dimmer, assign it to the switch, delete the dimmer, then drop the new switch onto the correct link. Can QS become as simple to change as the Ra2 software in a future rev?
During some redesign of a system today I swapped loads and locations so that a hybrid dimmer in room A moved to room B, and dimmer in room B went to room A. I then went about unassigning loads and reassigning to correct control stations (so that new dimmer in B has zone B). When looking at button programming the dimmer advanced programming had Both A and B zones. The hybrid keypad still had hold programming for zone A. Being able to switch dimmers to hybrid keypads and vice versa as simply as in Ra2 would likely solve this sort of bug.