RA2 extract program from repeater

Whats the best way to extract a program from a repeater RA2 if version unknown

If you know the ip address of the main repeater, you can log in to that ip address directly. User lutron password lutron, and look at the splash page for the main. You can get the version in one of the menus.

Extraction works when the versions match, 6.0 or later. Extraction is not supported prior to 6.0.

If the versions do not match, then make sure you have a live internet connection. The extraction tool will use a cloud from Lutron to assist the extraction.

I'm pretty sure that extraction only works in Inclusive.