Help needed! 1000 Watts LEDs on RRD-10ND - do I need a PHPM-PA?
Help needed!
So I have a client has decided to go LEDs due to the high wattage Incandescent issue in his installation - 2400 watts on one circuit.
So we spec'd out an LED candelabra bulb that will work at 25 Watts and is listed to work with the10ND.
However, I am uncertain that the 1000 watts of LEDs will work on the 10ND. The new bulbs comes out to be exact 1000 watts -
8 bulbs per fixturex25 watts=200 200 watts x 5 fixtures=1,000 watts
And I seem to recall that the LEDs draw a lot more power when ramping on. My instincts are telling me to add in the PHPM-PA anyways due to the ramp on issue.
However, it seems towork fine in the RA2 software - no caution signs pop up.
And the electrician has agreed to install the 10ND in its own box so no deganging issues there.
But I still have a nagging feeling the PHPM-PA is still needed.
Thank you in advanace - I so appreciate your feedback & suggestions!