Motion switch or sensor for external LED driver2
Q1: Will MSOPS5 work well with a non-dimmable LED driver?
Q2: What are my options for one motion sensor working with many switches & dimmers?
Context for Q1:
I am installing an LED strip lighting system with its own non-dimmable driver/receivers and wireless controllers (in-wall, hand-held, app/Alexa, carrier pigeon...) that do the dimming. None of these will turn off lights after kids have left them on.
I was warned by the LED sales tech not to use a switch that has a "soft on/off". I think she is referring to ramping which my CL's appear to do. I have MSOPS2 and MSOPS5 motion switches (and MSCL-OP153 motion dimmers) all over the house and so am familiar with how to install and program them, but not sure if they act like a relay, or "hard on/off", or whatever term describes the behavior a non-dimming driver requires from a switch.
Context for Q2:
There are 5 or 6 loads that will all be detecting the same motion in the same area. Some of these loads are the LED drivers above, others are recessed LED bulbs. All electrical is new work in an addition so hardwiring a wall-mounted motion sensor would be easy. What solution makes most sense for this application? Are there switches with hard on/off -- as well as dimmers -- that would work with a hardwired wall mounted sensor? Is there a reason to go with Maestro wireless?
Thanks in advance for your thoughts!