Hello all. Why Inclusive software does not give the option to setup a Shared Scene (e.g., All Off) for Pico remotes? I only see Single/Multi-room Scene available as option. Thanks in advance.
Printable View
Hello all. Why Inclusive software does not give the option to setup a Shared Scene (e.g., All Off) for Pico remotes? I only see Single/Multi-room Scene available as option. Thanks in advance.
I agree with you. However, you can do a copy from another button and paste it to the pico.
Thank you for providing your feedback. Since the Pico is a transmit only device and does not have any LED feedback, it will not support any kind of toggle function. I have sent your feedback to our Development team so they can look into having this support a shared single action scene.
Thank you Mike S. Having said that, I can still manually program a group of devices to obey a command from a Pico, can't I? Example: A 2-button Pico is added to a gang so that Client has an All On/All Off button when arriving/leaving the residence. It would normally be advised to have a seeTouch there instead, but since all lights are LED and seeTouch Hybrid is only Inc/Halo/MLV, then we can't add a seeTouch, therefore we add a Pico to the gang with WBX-ADAPT and program the Pico to turn On or Off a group of lamps. My question was that Inclusive makes it easier for an All Off scene, because it is pre-programmed as a Shared Scene; when you have 56 devices, it takes some time to add them all to a Pico with the "Off" command. Got the point? But I understand the Pico only sends commands, so no feedback, but the feedback here is to see all lights going On or Off, there is no really a need for a small LED to point that out.
Yes, you can still manually program all the loads to the on and off buttons and it will act just like a shared scene. I will pass your feedback to our Development team so they can look in to adding this feature in a future release.