Printable View
This switch is specifically mentioned in the installation for this light. I have 6 lights in this circuit. I have confirmed power after the switch at the light. I have also tried disconnecting all but the first light. Tried every setting on the dimmer, as well as the adjustment slider. I need to get this closed up! Any help is appreciated.
The AYCL/TGCL is polarity sensitive. Make sure you have power-in on the copper/black screw. The installation instructions show the power-out to the brass screw on the opposite side. You can try moving it to the brass screw on the same side as the copper screw.
Make sure the neutral connection didn't come loose when you were working in the box.