The time in the processor always change

Hi,

I have a problem on my project, it using homeworks QS system + connect bridge. The time in the processor was always change, everytime i upload my program the time is good and it was set according to my laptop time. but after a few hours i checked the time it change to +1 of my laptop time. I suspect the problem caused by the connect bridge, is it right that the connect bridge could update the time in processor according to the country that i used in the program ? I used Singapore as the country but my project was in Indonesia which is 1 hour late by Singapore. Is there any way to resolve this problem ?

Yes, the Bridge will periodically go out and check time and adjust if necessary.

You can NOT change the country after initial setup. However, there is a sneak...umm...work around.

Go to Tools, Project Settings, Project Options (tab).
Click "Add custom city."
Fill in the details.
Click done. Upload.

You can create a temporary file with the Indonesian city, then go to Project Options and click "Show Details" to find the correct details.

Hi, Randy.

Thanks for your idea, i'll try and hope this can work.

Quote:

---

Originally Posted by randyc

Yes, the Bridge will periodically go out and check time and adjust if necessary.

You can NOT change the country after initial setup. However, there is a sneak...umm...work around.

Go to Tools, Project Settings, Project Options (tab).
Click "Add custom city."
Fill in the details.
Click done. Upload.

You can create a temporary file with the Indonesian city, then go to Project Options and click "Show Details" to find the correct details.

---