Homworks QS with GRX Grafik eyes

I'm just checking something.
My Client has some old GRX 3106's and would like to use them on his house refit.
I was planning to use the QSE-CI-NWK to talk to a GRX-CI-RS232 on the Grafik eye link in RS232 mode to select scenes from a QS keypad button.
I was using QS keypads as there might be QS blinds in the rooms.

I think thats right ?

Quote:

---

Originally Posted by abutchart

I'm just checking something.
My Client has some old GRX 3106's and would like to use them on his house refit.
I was planning to use the QSE-CI-NWK to talk to a GRX-CI-RS232 on the Grafik eye link in RS232 mode to select scenes from a QS keypad button.
I was using QS keypads as there might be QS blinds in the rooms.

I think thats right ?

---

Dear abutchart,

Thank you for the information.

Unfortunately, the QSE-CI-NWK is unable to send commands out. For this application you will need to use the HomeWorks QS processor with an Ethernet to RS232 converter. This will allow the processor to send commands out to the GRX-CI-RS232 to control the scenes of 3106. We have an application note on how to setup the Ethernet to RS232 on the HomeWorks Resource and My Lutron Sites.

thanks Kevin

Anyone got a program showing the QS to Grafik eye in operation ??