Button Doubleclick not doing what expected
On an existing home with a Processor 8 with RF/Illumination setup, the original programmer basically only linked keypads with individual switch legs and didn't do any sort of Room/Scene setup to control lights as a group. The homeowner now wants me allow her to only push one button in the room for everything to come on, but she still likes to have the ability to control an individual light if she needs to and of course, getting a new keypad with more buttons is out of the question.
Fortunately, the engraving on the existing keypads is setup with the room name on top. For instance, the library is something like this:
Library
Chandelier
Bookshelf
Desk
The Library button however only controlled the downlights.
My idea was to make Library be a toggle/room button to control all 4 loads in the room so she could turn on and off the entire room with the single button. I also checked the Doubletap box and for the doubletap, made the downlights be 100% and left the other 3 loads as "unaffected".
My hope was that if she ever needed to just turn on the downlights, she could double tap the top button and only the downlights come on. Instead, doubletapping, still turns on everything and if while everything is on, doubletapping turns everything else off except for the downlights. This of course ultimately achieves what I want, but requires an extra step.
My questions are:
1. Why is this set up not doing what I expect it to do and it's affecting the "unaffected" lights?
2. How would I fix it or any suggestions on a better solution that doesn't cost extra in parts?